The "Textile Industry Equipment Management Evaluation Guidelines" Will Be Convened In The Spinning Group Standards.

At present, equipment management faces the challenges of equipment automation, process informatization, management lean, organization agility, operation intelligence and so on. Equipment management should be promoted to meet the requirements of the development of production technology. Standards are the best way to deal with them. Lean thinking is very important for managing and managing equipment assets and maximizing efficiency. At the same time, it can also narrow the gap between our country and the international advanced equipment management level, especially in terms of innovation, lean, value and so on, so as to improve enterprise management and realize the "two wheel drive" coordinated development of technological innovation and management innovation.

In December 5th, Beijing was very cold, and the discussions in the nine level conference room of the China Federation of textile industry were in full swing and professional. There were nearly 30 people from the production enterprises, trade associations, engineering associations, colleges and universities, quality supervision and management organizations and other relevant experts and business representatives. The guidelines for the evaluation of the equipment management in the textile industry were also examined and approved.

Sun Ximin, deputy director of the Ministry of science and technology development of China Federation of textile industry and Secretary General of the Standardization Committee of China Textile Federation, presided over the meeting.

Luo Shuhua, senior engineer of Dezhou Huayuan eco technology Co., Ltd., as the head of the group of experts, presided over the examination and approval of experts.

Wang Yuqi, director of the Ministry of industry of China Textile Industry Federation, introduced the compilation of the guidelines.

"Equipment management is an important pillar of enterprise safety production, green production, energy conservation and consumption reduction, quality assurance, and is an important guarantee to meet the requirements of enterprise capacity, variety, cost, quality, safety, environmental protection and other aspects. The textile enterprise equipment management system, which has laid a good foundation for the maintenance and repair of textile enterprises in 1988, is no longer applicable to the equipment lifecycle management and the rapid development of advanced technology and equipment, especially the continuous, automated and intelligent production mode. It is urgent to establish a device management system covering the whole life cycle of equipment, and guide enterprises to better manage equipment, improve equipment management level, improve the operation efficiency of equipment assets, and enhance the competitiveness of enterprise equipment management. Wang Yuqi introduced the background of the compilation of the guidelines.

"Looking back on the history of equipment management in China, from July 28, 1987, the State Council promulgated the" list of equipment management for industrial transport enterprises owned by the whole people ", and issued the" equipment management system for textile industrial enterprises "issued by the Ministry of industry and information technology in August 22, 1988. The Ministry of industry and information technology issued the notice on Further Strengthening the management of textile enterprises. Although all equipment management work has been standardized and guided, there are no similar management standards up to now. Therefore, the formulation of the guidelines is the first equipment management standard since the establishment of the China Textile Industry Association, and will also achieve a breakthrough in the standard of production management in China's textile industry. Wang Yuqi said.

According to Wang Yuqi, the Ministry of industry of the China Textile Industry Federation is responsible for organizing the compilation of the guidelines. Since March 2016, it has proposed the compilation of the guidelines, the reporting group standards, the editorial board of the guidelines, the principles and framework for the compilation, the expert seminar, the draft and the draft of the guidelines, and the draft of the guidelines to the manuscript. In the process, many units such as Lu Tai textile Limited by Share Ltd, Nantong Shuang Hong Textile Co., Ltd. and Bashan Group Co., Ltd. participated in the process. On the basis of consulting a large amount of data, the editorial committee, drawing on the relevant standards, learned from the advanced concepts and related information of equipment management at home and abroad, constantly adjusted the compilation ideas and evaluation models, and completed the guidelines after three years of compilation. The guide ultimately includes 16 key management elements, including the process management requirements for the equipment lifecycle. For the weak links and the neglected links of the enterprise equipment management, the requirements are clearly set forth in the evaluation guide. Such as knowledge management, equipment management system control and so on. The guidelines (Draft for Soliciting Comments) received advice from experts and related units in the trial of textile enterprises, and the editorial board objectively accepted and revised the proposal. The adoption rate reached 96%.

After attending the introduction of the drafting group's task sources, standards drafting and soliciting opinions, the participants discussed and examined the standards (Draft) and put forward relevant amendments. The meeting unanimously passed the approval of the group standard of the textile industry equipment management evaluation guidelines. Experts at the meeting said:

The standard specifies the technical requirements for equipment management evaluation in the form of guidelines. It has the following innovations: the guidelines incorporate modern management concepts such as "lean thinking and TPM management", and establishes an equipment management evaluation system with the characteristics of the textile industry. The evaluation requirements put forward quantitative indicators and qualitative requirements for the construction of equipment management system, highlighting the evaluation essentials of digitalization, informatization, intellectualization and knowledge management, and the evaluation results are represented by "management maturity", so as to facilitate the horizontal benchmarking of enterprises in the industry.

The equipment management and control system established by the standard, the evaluation of key elements and operation performance indicators of equipment management system are clear, and the requirements for evaluation of management elements are clearly stated. The relevant technology and management contents are reasonable, and the operability is strong, and the overall level reaches the international advanced level. The formulation of this standard will provide an important leading and exemplary role in promoting the high quality development of textile manufacturing and improving the management level of textile equipment.

At the meeting, Sun Ximin said that in the context of the current textile industry management standard vacancy, this group standard is particularly important. The standard reflects the voluntary nature of the market. After the market is released, the standard is the best way to promote experience and technological achievements. Through standardized way, advanced management experience and technological achievements can be popularized and applied, so as to raise the level of equipment management, and also reflect the value of the standard. Therefore, it is necessary to do well the work of the "guide" group logo. In accordance with the requirements of the China Federation of textile industry standards for the management of organizations, there are three draft and three trial requirements for the League Logo. The results of the draft "preliminary draft" are satisfactory, and the second trial is the most critical part of the standard. Today, experts are invited to examine and approve the guidelines. The level of approval of this standard will depend on the level of the expert's recognition of equipment management. Please check it carefully according to the requirements.

Sun Ximin finally said: experts have carried out a detailed evaluation of the guidelines. The content of the guidelines is rich. The next step is to put forward the technical deviations and editorial suggestions put forward by experts as soon as possible. The China Textile Federation's bid committee is an important platform. We hope you can make full use of it and guide the concrete work.

In summing up the speech, Hua Shan said that the work of the League standard, which was led by the Ministry of industry, is unique because it is a management standard different from the product standard. Writing team in the grope of innovative ideas and writing mode, you can feel the difficulty of the work process, but for a long time, has been the industry's key business leaders and experts in related fields support, thank you. Today, experts from various fields and experts have conscientiously approved the guidelines, and have fully affirmed the work done in the previous stage. This is also the result of joint efforts of members and experts of the Editorial Committee under the support and guidance of director Sun Ximin. Next, the task is heavy. We need to continue to improve the guidelines and fulfill the requirements of the League standard release, do a good job in publicizing the guidelines and so on, so that the guidelines can really play a guiding role in guiding enterprise equipment management innovation to achieve the goal of high quality development.